Operating instructions

Configuration and Settings Nur für den internen Gebrauch
A31003-G2550-A100-6-76A9, 04/2005
4-12 optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
optiClient5d_Konfiguration.fm
Settings for the Main Program
4.2.5 Settings for Changing the Connection Status
Depending on the display mode set for optiClient 130 in normal mode, you may want the display
mode to reflect a change of connection status. For example, if the main bar is minimized in con-
nection-free status, you can enter a setting that places optiClient 130 back on top in the case
of incoming or outgoing calls.
To edit these options, select Main program - Change of connection status.
Display of options
> You can define the optiClient 130 display mode for every connection status. The following
connection statuses exist:
– Without connection
Connection-free status (no connection request, no connection setup, no active con-
nection).
– Connection setup
You set up a connection to another station, for example, a call connection, by dialing a
call number.
– Active connection
A connection is active, for example, a call is in progress.
– Connection request
You receive a connection request, for example, a caller is calling you.
>
Options for editing settings for changing the connection status are only available in
the case of activation when logging on, not in the case of activation during live oper-
ation.