Operating instructions

optiClient5d_Konfiguration.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
4-9
Nur für den internen Gebrauch
Configuration and Settings
Settings for the Main Program
– Hide settings and Location-/User management
The entry Change password only appears in the Logon dialog if you click Manage. No
other functions are available.
See also:
Logging In
> LIN mode
This option controls how an LIN (Local Identification Number) is entered in the logon mask.
The LIN is used - for example, to pinpoint emergency calls - for the local assignment of
buildings, building section numbers, etc. You can choose between:
– suppressed (no entries)
The LIN field is omitted from the logon mask.
– optional (empty entry field)
The LIN field appears blank in the logon mask and can remain blank for logon.
– optional (display last entry)
The LIN field appears in the logon mask, the LIN from the last logon is set by default,
the field can be left blank for logon.
– mandatory (empty entry field)
The LIN field appears blank in the logon mask and must be filled out for logon.
– mandatory (display last entry)
The LIN field appears in the logon mask, the LIN from the last logon is set by default,
the field must be filled out for logon.
4.2.3 Settings for Ending the Program
To edit options for ending the optiClient 130 program, select Main program - End of program.
>
If no password has been stored for a user, optiClient 130 is started directly without
a login dialog. If you want to see the Login dialog in any case, but do not wish to as-
sign a password, you may optionally select the LIN option (empty input field) here.
The Login dialog will then appear on starting the program.
>
General information on navigating within the Settings dialog can be found under
Navigating the Dialog Settings.
>
Options for editing settings for program termination are only available in the case of
activation when logging on, not in the case of activation during live operation.