Operating instructions

optiClient5d_Konfiguration.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
4-3
Nur für den internen Gebrauch
Configuration and Settings
General Remarks
for Provider modules
● Settings for the HiPath Provider on HiPath 3000/4000/5000 if HiPath Provider is active
and connected to HiPath
3000/4000/5000
– Device Settings x--
– Settings for the Main Connection x--
– Settings for Main Network Access x--
– Settings for the Fallback connection x--
– Settings for Fallback Network Access x--
– Settings for Failover x--
– Settings for Bandwidth Reduction x--
– Port Restriction Settings x--
– Virtual Private Network (VPN) Settings x--
– Quality of Service (QoS) Settings x--
– Settings for Licensing x--
– Operation Settings -- x
● Settings for the CTI Provider on HiPath 3000/4000/5000 if CTI Provider is active and
connected to HiPath 3000/
4000/5000
– Device Settings x--
– Settings for the Connection x--
– Network Access Settings x--
● Settings for the Sendmail Provider no setting no setting
for Manager modules
● Settings for the Keyboard Manager
– Key Assignments x--
● Settings for the ScreenSaver Manager
– Settings x--
>
The type and scope of the possible user settings depends on the modules installed
and configured in optiClient 130. This overview applies to the standard installation
of optiClient 130 without expansions.
Available settings via
Logon
during live
operation