Operating instructions

optiClient5d_Konfiguration.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
4-1
Nur für den internen Gebrauch Configuration and Settings
General Remarks
4 Configuration and Settings
4.1 General Remarks
To ensure the smooth operation of optiClient 130, different settings must be made for each in-
dividual user. The type and scope of the settings depend, for example, on the modules installed
and activated, basic network parameters, the audio hardware installed, etc.
Various settings such as the own call number at the communication system must be set before
logon; otherwise, the telephone will not work properly. You should switch to the mask for editing
settings as soon as you create a new user in the logon dialog.
Other settings, such as call list options, have no effect on the general operation of optiClient
130 and can be edited during live operation after you log on.
The user preferences are edited in the Settings dialog. You can open this dialog both from the
Logon mask (that is, before operating parameters are loaded/read in) as well as during live op-
eration after logging on from the optiClient 130 menu.
See also:
Logging In
The optiClient 130 Menu
>
Please refer to the section Starting optiClient 130 for the First Time with Active Cen-
tral Configuration (DLS) for special information on using the central configuration for
configuring or logging on users for the first time.
>
Operating settings are defined for your user in the course of installation and initial
user configuration and should not be modified. Reminders are provided in this doc-
ument when describing the relevant settings.
>
Information on individual users are administered by optiClient 130 in the folder
C:\Documents and Settings\All Users\User Data\Siemens\optiCli-
ent
by default. The Settings Folders Tool is available to the optiClient 130 administrator
if you want to configure a different folder for storing user information (e.g., a central
folder on the network). For more information, see the section Administration of the
Settings Folder.
>
A migration tool is available to the optiClient 130 administrator if user data from a
previous version of optiClient 130 needs to be transferred. For more information, see
the section Transferring Data from the Previous Version (Migration).