Operating instructions

optiClient5d_Anzeige.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
3-31
Nur für den internen Gebrauch
First Steps, Display Modes and General Operation
General optiClient 130 Operation
Example
3.3.11 Updating the Program
There are two ways to check for possible updated versions of the optiClient 130 program:
1. Configure an automatic search function that searches a defined memory location for up-
dates at specified intervals.
An advisory appears if the automatic search function finds a new program version. In this
case, you have three options:
– You can install the program update immediately.
– You do not install the program update; in this case, another search will be performed
for an updated program version the next time you log on.
– You do not install the program version. The automatic search is deactivated.
2. You start a manual search for updates by selecting the entry Update program in the opti-
Client 130 menu.
A new program version found in the course of a manual search is installed following a con-
firmation prompt.
The memory location for the program updates and the settings for the automatic search are de-
fined in your user preferences. For more information, see Settings for Program Updating.
>
Only a Windows user with local administration rights can install an update version.