Operating instructions

optiClient5d_Anzeige.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
3-27
Nur für den internen Gebrauch
First Steps, Display Modes and General Operation
General optiClient 130 Operation
3.3.7 The optiClient 130 Screen Saver
optiClient 130 comes with a screen saver that can be activated as the default screen saver for
your PC. The following extended functions are then available.
When the optiClient 130 screen saver is active, you can
● dial a configured speed-dial number directly.
● accept/end direct incoming calls.
without closing the screen saver.
Working with the optiClient 130 screen saver
Screen saver (segment)
● The lower section contains information about the optiClient 130 activity status. If optiClient
130 is not active, you cannot accept any incoming calls or set up a connection with the
speed-dial number.
● Deactivate the screen saver by clicking Close Screensaver.
● If you configured a speed-dial number, the button Dial xxx appears (xxx here stands for
the speed-dial number). If optiClient 130 is active, clicking this button dials the number di-
rectly without closing the screen saver.
● If a call is received for you when optiClient 130 and the screen saver are active, an appro-
priate button appears and can be used to accept the call. To clear down the connection,
simply click the disconnect button provided. The screen saver remains active.
See also: Settings for the ScreenSaver Manager.