Operating instructions

First Steps, Display Modes and General Operation Nur für den internen Gebrauch
A31003-G2550-A100-6-76A9, 04/2005
3-26 optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
optiClient5d_Anzeige.fm
General optiClient 130 Operation
optiClient 130 lets you perform direct dialing in all windows using the numerical keys and set
up a connection or scroll through the Service menu using the keys X and Z . The digits
dialed or the Service menu entries are shown on the telephone’s display. Direct dialing is not
possible, however, if the cursor is currently in an input field, for example.
For more information on the settings for keyboard operation, see the section Settings for the
Keyboard Manager.
3.3.6 Dialing Aids
You can use the following dialing aids to set up a connection in optiClient 130 to a call number
entered in another program, for example, a text processing application:
Dialing with copy & paste
● Mark the call number in the program (for example, text processing application) and copy it
to the clipboard with I + c (or Ì + c) or with the menu functions provided by
the program).
● Switch to optiClient 130. Paste the call number from the clipboard back into the phone’s
display field with
– < + f (or Ï + í ) without the trunk code
– or with I + v (or Ì + v) with the trunk code
● The call number appears in the display, and the connection is set up directly.
Dialing with drag & drop
● Use the mouse to mark the number you want in the program (for example, text processing
application).
● Drag the marked number to the optiClient 130 phone’s display and then release the mouse
button (in other words, drop the dragged number there).
● The call number appears in the display, and the connection is set up directly.
>
Direct dialing/scrolling through the Service menu with the dialing keyboard is not
possible in the Webbrowser window.