Operating instructions

optiClient5d_Anzeige.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
3-25
Nur für den internen Gebrauch
First Steps, Display Modes and General Operation
General optiClient 130 Operation
> Open the context menu for the function key to be labeled and select Change caption. A
dialog appears for entering the caption text.
Programming function keys
The communication system to which your optiClient 130 user is connected defines how the
available function keys can be programmed on the optiClient 130 phone and on the extended
keypad. For more information, see the section Telephony functionsHiPath 4000 or HiPath 3000/
5000 Telephony functions.
3.3.5 Operating with the PC Keyboard
The following applies with operating the optiClient with the PC keyboard:
>
If while programming function keys the required caption (for example, the call
number) appears in the display, you can automatically accept this text as the
caption. Open the context menu for the function key to be labeled and select Ac-
cept caption from display.
When programming function keys, the name is shown in the display in addition
to the associated call number. You can accept this as a caption by holding down
the < (Ï ) key when selecting Accept caption from display.
Action Key/key combination
System-wide keys (at every cursor/mouse position)
Accept a connection request Key can be configured
End connection (for example, replace the handset) Key can be configured
Cursor/mouse in the optiClient 130 phone or on the main bar
Browse functions X or Z
Confirm function =
Revert to idle state in the system menu _ (This key corresponds to the button
with the red handset on the main bar)
Dial directly from the clipboard, with conversion of
the characters to be dialed determined by the net-
work access. The trunk code is not added.
< + f (or Ï + í)
Dial directly from the clipboard, with conversion of
the characters to be dialed determined by the net-
work access. The trunk code is added in this case.
See also: Settings for Main Network Access or
Settings for Fallback Network Access).
I + v (or Ì + v)