Operating instructions

optiClient5d_Anzeige.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
3-23
Nur für den internen Gebrauch
First Steps, Display Modes and General Operation
General optiClient 130 Operation
See also:
Integrated Phone
The optiClient 130 Module Menu
Device Settings
3.3.3 The Extended Keypad
The extended keypad provides you with multiple columns of freely programmable function keys.
You can program these keys with frequently dialed call numbers or telephony functions, for ex-
ample, and then select them with a simple mouse click.
Number of columns
The number of columns available and the number of keys in the columns are determined by
your selection of the phone and key module type (see also section Device Settings).
Display
Following startup of the optiClient 130, these keys may be predefined with standard functions
of the communication system (function + label).
Key captions - Electronic Key Labeling
The selected phone or key module type also determines whether Electronic Key Labeling (EKL)
is available for the keys. With EKL, all keys that are programmed with a function (regardless of
whether by default or by manual programming) are automatically labeled with the "suitable"
function test that is defined in the communication system. It is not possible to enter a custom-
ized caption in optiClient 130.
If you have selected a phone or key module type without EKL, you can label the keys in optiCli-
ent 130 and also assign the destination numbers there.
multi-columnone column