Operating instructions

First Steps, Display Modes and General Operation Nur für den internen Gebrauch
A31003-G2550-A100-6-76A9, 04/2005
3-22 optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
optiClient5d_Anzeige.fm
General optiClient 130 Operation
● Function keys
The optiClient 130 phone includes four or five freely programmable function keys, depend-
ing on the selected telephone type. Following startup, these keys are predefined with stan-
dard functions of the communication system (function + label).
See also:
Device Settings
Labeling/Programming Function Keys
● Dialing keyboard
On the dialing keypad, you will see the digit keys d - m (also labeled with letters) and q
and r. Depending on the input mode set, you can enter normal and special characters at
the push of a button. To do this, simply press the digit key as often as needed until the de-
sired character appears in the display. Typical examples for the input of letters includes the
labeling of programmed phone numbers (for telephone types with EKL).
See also:
Device Settings
● Dialog keys
The three dialog keys are used to scroll forwards and backwards, to confirm functions and
in the Service menu.
Display options
● The free and integrated phone can be opened simultaneously.
● Clicking in any free area in the telephone opens a context menu that allows you to individ-
ually turn on or turn off the display of the function keys, the dialing keypad and the dialog
keys. In the free phone, you can also turn the display on or off by this method.
● The display options of the free and integrated phone may differ. For example, you can show
only the display on the main bar for the integrated phone, while freely positioning the free
phone with the dialing keyboard, dialog keys and function keys anywhere on the desktop.
● In idle state, the integrated phone only shows the display on the main bar. Simply click the
display to open the associated keypads set or the free phone. The required behavior can
be configured.
● The display of the integrated phone always appears as a two-line display on the main bar.
>
If an automatic line seizure was configured on the connected HiPath 3000/5000
communication system, the function "Initiate an internal call" will be programmed
on the third function key. In this case, you need to manually change the key cap-
tion to Internal Calls.