Operating instructions

optiClient5d_Anzeige.fm

A31003-G2550-A100-6-76A9, 04/2005

optiClient 130 V5.0 , Administrator Documentation and Operating Instructions

3-21

Nur für den internen Gebrauch

First Steps, Display Modes and General Operation

General optiClient 130 Operation

● Open new Web Browser...

Opens a new Web browser window in which the configured web pages can be selected

(see also the section The optiClient 130 Web Browser Window).

3.3.2 The optiClient 130 Phone

Display

The optiClient 130 phone can be optionally set up as a freely floating phone or an integrated

phone. The freely floating phone can be positioned anywhere on the desktop; the integrated

phone, by contrast, is docked permanently to the main bar.

The optiClient 130 phone has the same controls as a desktop phone and can also be operated

identically.

The optiClient 130 phone lets you initiate outgoing calls (voice connections), accept incoming

calls or else perform service menu functions for the communication system connected (such

as, activate night service, ringer cutoff, call waiting without tone, code key, etc.).

● Display

In normal mode, the display field shows the idle menu from which you can set up or receive

call connections. In addition, you can initiate outgoing voice connections, accept incoming

calls and also execute service menu functions of the connected communication system.

Apart from the date and time, the display shows the own telephone number and the des-

ignation of the connected communication system. The display in the integrated phone al-

ways has two lines; the display in the freely floating phone, by contrast, may have two or

four lines, depending on the configuration of the telephone type for optiClient 130.