Operating instructions

First Steps, Display Modes and General Operation Nur für den internen Gebrauch
A31003-G2550-A100-6-76A9, 04/2005
3-18 optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
optiClient5d_Anzeige.fm
General optiClient 130 Operation
3.3.1.5 The Telephony Menu and Phone Buttons on the Main Bar
General
The communication system connected to the optiClient 130 basically specifies which telephony
functions are available. In optiClient 130, the available functions can be used for direct activa-
tion in the Telephony menu. You can program frequently used functions on buttons and store
them directly on the main bar.
An overview of the telephony functions available in optiClient 130 is provided in the section Te -
lephony functionsHiPath 4000 or HiPath 3000/5000 Telephony functions.
Telephony menu (example)
> Functions that can be activated in the optiClient 130 (connection) status currently active
are shown in full color in the menu in the above example. Functions that cannot be
activated are gray (display depends on the color scheme selected).
Activating/deactivating telephony functions
> Open the Telephony menu and select the relevant function
or
> click the function button on the main bar
Depending on the function type, you may have to specify additional information to execute
the function (for example, enter the code for the Code key function).
Placing function buttons on the main bar
> Open the Telephony menu.
> Open the context menu of the desired telephony function and select Display function in
the main bar. The button icon is placed on the main bar.
Telephony menu
Telephony functions
Buttons for Telephony functions on the main bar