Operating instructions

optiClient5d_Anzeige.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
3-17
Nur für den internen Gebrauch
First Steps, Display Modes and General Operation
General optiClient 130 Operation
Add forwarding
> Open the context menu on the Forwarding button and select Add.
> You can now use the Type of Forwarding dialog to define the Destination (call number)
and a designation (Optional text). This defines the call forwarding.
The following types of forwarding are available for HiPath 3000/5000:
– unconditional
– external unconditional
– internal unconditional
The following types of forwarding are available for HiPath 4000:
– unconditional
– external unconditional
– internal unconditional
–busy
– no answer
– on busy/no answer
Change forwarding
> Open the Forwarding menu
> Open the context menu of the forwarding details you want to edit and select Change.
> Change the settings as desired.
Deleting Forwarding
> Open the Forwarding menu
> Open the context menu of the forwarding details you want to delete and select Delete.
Enabling / Disabling Forwarding
> Open the Forwarding menu The enabled call forwarding items are shaded in a dark color
(or bright, depending on your color scheme).
> Clicking on an entry toggles the state between enabled and disabled (on and off).
>
Clicking the Forwarding Button will enable or disable all active call forwarding items.