Operating instructions

optiClient5d_Anzeige.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
3-1
Nur für den internen Gebrauch First Steps, Display Modes and General Operation
Starting the Program, Logging On, Terminating the Program
3 First Steps, Display Modes and General Operation
This chapter provides you with information on the following topics:
● Starting the Program, Logging On, Terminating the Program
● The Representation of optiClient 130 Controls
● General optiClient 130 Operation
3.1 Starting the Program, Logging On, Terminating the Program
This section provides information on the following topics:
● Starting optiClient 130
● Logging In
● Exiting optiClient 130
3.1.1 Starting optiClient 130
The installation routine creates a program group and shortcut for optiClient 130 on the desktop.
To start optiClient 130
> double-click the optiClient 130 shortcut icon on the desktop
or
> select Start - Program Files - Siemens - optiClient.
The Logging In mask appears. If there is no password saved for the last user, logon is automat-
ically performed with the last settings entered (user, language, location) when optiClient 130 is
started). If you want to force the logon mask to appear, for example, to enter another user, hold
the < / Ï button depressed when starting the optiClient 130 program.
3.1.2 Logging In
Log on to optiClient 130 as a user first when the program starts:
>
Since the < / Ï key is used to select multiple items under Windows by de-
fault, make sure that only the entry for optiClient 130 is selected on the Desktop when
starting optiClient 130 before you hold down the < / Ï key and start the
program (mandatory Logon dialog).