Operating instructions

optiClient5d_Installation.fm

A31003-G2550-A100-6-76A9, 04/2005

optiClient 130 V5.0 , Administrator Documentation and Operating Instructions

2-5

Nur für den internen Gebrauch

Installing optiClient 130

2.3 Installing optiClient 130

To install optiClient 130 on your client PC, you will require the installation CD with the following

title:

Installing optiClient 130:

1. Insert the installation CD into the CD-ROM. The installation program starts automatically.

If the CD does not automatically start when you insert it due to settings in the Control Pan-

el, select Start -Run and then enter the initial letters of the installation program on the CD

drive (in example D:):

D:\setup.exe.

2. Click Next in the welcome dialog.

3. You can read the optiClient 130 licence contract in the license dialog. Installation is initiated

once you accept the agreement and click Next.

4. To personalize the installation, enter your name and organization in the Full name and Or-

ganization fields in the User info dialog. Select the availability of optiClient 130 for All us-

ers for this PC or Only for me and confirm with Next.

5. You can now edit the scope of features to be installed or accept the default recommenda-

tion without changes. All listed languages are generally installed for the user interface. The

target folder for the installation is displayed under Save in. The default path is:

C:\Program Files\Siemens\optiClient. Confirm your entries with Next.

6. If you do not want to install the online help in all available languages, you can now remove

individual languages from the installation operation. Although optiClient 130 can still be op-

erated in all languages, no online help is now available in the languages removed. The on-

line help is installed in all listed languages by default. Confirm your entries with Next.

7. Now specify the standard provider connected to the optiClient 130. The following options

are available:

–CTI Provider

To operate desktop telephones (connected to a HiPath 3000/4000/5000) over optiCli-

ent 130.

– HiPath Provider

To connect the optiClient 130 directly to the HiPath 3000/4000/5000.

– SIP Provider

To connect the optiClient 130 directly to the HiPath 8000/Cisco proxy.

optiClient 130 V5.0

System CD

P30152-P1149-A1-*