Operating instructions

Quick Reference Guide for optiClient 130 V5.0 Nur für den internen Gebrauch
A31003-G2550-A100-6-76A9, 04/2005
12-2 optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
optiClient5d_QuickRef.fm
● The Module menu on the main bar
opens on clicking the Module menu button on the main bar and enables functions from in-
stalled/configured components (modules)
● The optiClient 130 V5.0 menu
is opened as a context menu of the main bar (right-click an unassigned area on the main
bar) and provides some general functions.
Using the phone
● Available as integrated and/or free phone.
● The Display is used in the dialog with the connected communication system (call displays,
menu prompts for the service menu).
● The function, dialing, and dialog keys can be activated (optional) and operated like the keys
available on a desktop device.
Using the easyCom communication circle
● The large central circle symbolizes you (your call number). Other participants are shown in
small connection circles.
● Flashing circles indicate connection requests (incoming or outgoing)
● If you position the cursor on a connection circle, a ring appears. You can activate telephony
functions in the ring and also in the context menu for the connection circle.
● To establish a connection, enter the Call number and then click Call .
Accepting a connection request
A connection request can be accepted in various ways:
– Press the green “Lift Handset“ button
– Press the key on the PC keyboard that was configured system-wide for acceptance.
– If you have a configured terminal with a handset, pick up the handset.
– If the easyCom window is active, drag the flashing connection circle into the central
circle.
Disconnecting an active connection
An active connection can be disconnected in various ways:
– Press the red "Replace Handset“ button
– Press the key on the PC keyboard that was configured system-wide for disconnecting.
– If you have a configured terminal with a handset, replace the handset .
– If the easyCom window is active, click the "Disconnect" symbol on the ring for the con-
nection circle or drag the connection circle out of the central circle.
Setting up a connection
You have various options here as well:
– Use the key field of the optiClient 130 V5.0 phone.
– Use the number keys on your PC keyboard
– Search for a contact from a directory and dial that contact directly from its context
menu (right-click).