Operating instructions

optiClient5d_Administration.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
11-9
Nur für den internen Gebrauch
Administrator Notes, Tips & Tricks
The optiClient 130 User and Location Concept
Updating Outlook contacts in optiClient 130
When personal contacts are added in Outlook, they must be updated in order to be visible in
optiClient 130. A note is therefore displayed in optiClient 130 to inform you about the status of
the update.
11.8 The optiClient 130 User and Location Concept
The underlying User and Location Concept in optiClient 130 provides for central management
of internal information about users (call number, display mode of the optiClient 130, etc.), the
local PC (audio devices, local hardware, etc.) and the location (communication system, net-
work infrastructure, etc.). This enables users to:
● log in from a fixed workplace at a fixed location,
● log in from different workplaces or different users to log in from one workplace at a fixed
location (e.g., in a call center without fixed workplace assignments),
● log in at different workplaces at different locations (e.g., from the office or when teleworking
from home),
while retaining their familiar and current settings.
11.9 Starting optiClient 130 for the First Time with Active Central
Configuration (DLS)
11.9.1 Information for Configuration in optiClient 130
If central configuration is active, the following points must be taken into account before the op-
tiClient 130 program is started for the first time. In addition, specific settings must be taken into
account in the optiClient 130 user configuration:
● Logon
It is mandatory to enter the terminal number as the Login when logging on to optiClient
130. A DLS connection is not possible if a user name is specified instead of the terminal
number.
An optional setting must also be entered under Location.
A password can be set.
See also:
Logging In