Operating instructions

Administrator Notes, Tips & Tricks Nur für den internen Gebrauch
A31003-G2550-A100-6-76A9, 04/2005
11-8 optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
optiClient5d_Administration.fm
Settings and Notes for Outlook
USB driver for the Plathosys USB handset CT-180
Once you have connected the Plathosys USB handset CT-180 to the PC, the hardware assis-
tant activates and prompts you to specify the folder containing the relevant USB driver. This
driver can be found in the folder \Misc on the installation CD. The Plathosys basic functions
are supported.
11.7 Settings and Notes for Outlook
Normalization of call numbers in Outlook
In order to enable dialing from Outlook, it is important to enter the location information for Out-
look under Start - Settings - Control Panel - Phone and Modem Options as shown in the
figure below. The location and code information shown in the figure are examples. Enter the
parameters for your location here:
The call numbers are then normalized and displayed in Outlook as follows: