Operating instructions

optiClient5d_Administration.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
11-7
Nur für den internen Gebrauch
Administrator Notes, Tips & Tricks
Font Size in optiClient 130
Change APIMAX
AE-ZAND:TYP=CIT,APIMAX=XXXX;
Change WSPROT
einr-dimsu:typ=applikat,wsprot=xxx;
Apimax=XXX (zand) must b set: display with ab-zandTyp=cit;",
Change with "ae-zand:typ=cit,apimax=xxx;"
where xxx is the same number as WSPROT
WSPROT=xxx (where xxx is the number of optiClient stations (+stations
with Callbridge for other optiPoint400/500/600)). (dimsu) must be set:
Display with "ab-dimsu:typ=all,param=wsprot;",
Change with "einr-dimsu:typ=applikat,wsprot=xxx;"
11.4.3 Configuration for usage of the headset at the USB handset
To use the headset at the USB handset , the following parameters must be set for each call
number within the HiPath 4000 :
KOPFSG=MITIND (sbcsu)
11.5 Font Size in optiClient 130
For smooth operation and optimum display in optiClient 130, ensure that the setting Small
Fonts (normal size is 96 dpi) is entered in the Size field under Desktop Properties - Settings
- Advanced - General.
11.6 USB Driver
USB driver for terminal device control (CTI provider)
Once you have connected the phone to the PC, the hardware assistant activates and prompts
you to specify the folder containing the relevant USB driver. This driver can be found in the fold-
er \Misc on the installation CD.