Operating instructions

optiClient5d_Administration.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
11-3
Nur für den internen Gebrauch
Administrator Notes, Tips & Tricks
Transferring Data from the Previous Version (Migration)
11.2 Transferring Data from the Previous Version (Migration)
A migration tool is available for transferring data from the previous version of optiClient 130
(V2.5/4.0). During migration, the following data (if available) is transferred from the preceding
optiClient 130 Version V2.5 or 4.0 for optiClient 130 V5.0 users:
● Key captions
● Call number
● Connectivity information (Gatekeeper)
● Information about the LDAP connection
● Optional: transfer of contacts into the Contacts folder
● Optional: transfer of contacts to Outlook (if present)
Installation
The optiClient 130 Installation CD also includes the installation program for the migration tool.
You will find the installation program on the Installation CD under \Tools.
> Insert the CD, select the installation program setup.exe and click OK.
> The installation is performed without requiring any further input. To complete the
installation, click Finish.
The migration tool is now installed.
Starting the Program
After installation, the migration tool is stored under
–<
optiClient 130 Program Directory >\Client
– and named Siemens.OptiClient.Migrationtool.exe
You will find a link (Siemens.OptiClient.exe.Migrationtool.lnk) to this tool in the
<
optiClient 130 Program Directory >\Tools file.
Proceed as follows to start the tool:
● Start - Run: select the tool and click OK.
Operation and Notes
>
When the migration tool is started, it first compares its own version with that of the
existing optiClient 130. If the two versions are not compatible (e.g., if an older tool
version is being used), a corresponding message appears, and the migration tool ex-
its without transferring any data.