Operating instructions

optiClient5d_TelefonieHp4.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
10-15
Nur für den internen Gebrauch
Making Calls with the HiPath 3000/4000/5000
Settings for the CTI Provider on HiPath 3000/4000/5000
> Confirm the Key module type optiset key module.
> The following applies to the maximum number of key modules diaplyed in optiClient 130
(Maximum number of key modules):
– Minimum value 0:
the extended keypad is empty (no columns).
– Maximum value: 2 columns.
> If a headset is connected to the headset adapter on your telephone device, this option must
be activated, since the headset controller in optiClient 130 cannot operate correctly without
it.
10.2.2 Settings for the Connection
To edit the parameters for the connection, select the entry: Provider modules - CTI Provider
- Connection Enter the information here that defines your connection between optiClient 130
and your communication system HiPath 3000/4000/5000:
Display
> Select your communication system as the Type. The available communication systems are
HiPath 3000 or HiPath 4000.
> In the Access field, select the CTI connection. The available options are:
– COM1 to COM9
– LAN for access via the network. Then enter the IP address as well.
– USB for a USB device connected via a COM port emulation
>
On the communication system, there can still be a maximum number of concur-
rently present / opened key modules configured for all users. If this value is or
would be reached on opening the extended keypad, fewer key modules (co-
lumns) may be displayed there.