Operating instructions

Making Calls with the HiPath 3000/4000/5000 Nur für den internen Gebrauch
A31003-G2550-A100-6-76A9, 04/2005
10-14 optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
optiClient5d_TelefonieHp4.fm
Settings for the CTI Provider on HiPath 3000/4000/5000
10.2 Settings for the CTI Provider on HiPath 3000/4000/5000
With the help of the CTI Provider, you can take full advantage of your connection to HiPath
3000/4000/5000 by also operating desktop devices with the optiClient 130. This provides you
with the extended functionality of optiClient 130 (e.g., contact directory, contact list, easyCom
communication circle, extended call lists, directory processing, etc.), which would otherwise not
be available when using the devices alone.
When the CTI Provider is activated in optiClient 130, ring tones are not signaled with the sound
card or the Siemens optiPoint handset or controlled via the optiClient 130 (volume), but only at
your desktop device.
To configure your user settings for the CTI Provider at the HiPath 3000/4000/5000, select the
Provider modules tab in the Settings dialog.
The settings for the CTI provider can be found under the entry CTI Provider.
You can configure the following settings for the HiPath 3000/4000/5000 communication system:
:
● Device Settings
● Settings for the Main Connection
● Settings for Main Network Access
10.2.1 Device Settings
In order to connect the optiClient 130 via the CTI Provider and thus enable the "remote opera-
tion" of your desktop device, the existing device types must be configured. To do this, select
Provider modules - CTI Provider - Device:
Display
> Select your Phone type. The available options are optiset comfort/advance, optiPoint
410 standard and optiPoint 600.
>
By default, the HiPath Provider and not the CTI Provider is added as a module, so
you will need to remove the HiPath Provider module and add the CTI Provider mo-
dule instead. For more details on this procedure, see the section Navigating the Di-
alog Settings.