Operating instructions

Making Calls with the HiPath 3000/4000/5000 Nur für den internen Gebrauch
A31003-G2550-A100-6-76A9, 04/2005
10-12 optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
optiClient5d_TelefonieHp4.fm
Settings for the HiPath Provider on HiPath 3000/4000/5000
> Activate the Change QoS settings option if you want to adapt the default settings for QoS.
> Enable QoS under Windows 2000 lets you activate or deactivate the use of Quality of
Service (QoS) under Windows 2000. This option must be activated for improved voice
quality which is predominantly dependent on the infrastructure in the network.
This option does not apply when using under Windows XP as QoS is always available
under Windows XP.
> Click Default settings to display the default values for HiPath networks.
> For each of the transmission layers Layer 2: User Priority acc. to IEEE802.1p and Layer
3: Priority classes (Codepoint acc. to DiffServ), you can use the Mark packets option
to specify whether the optiClient 130 data for the Call Signaling and Voice Payload traffic
types is provided with the values set above.
See also: Configuring/Installing Quality of Service.
10.1.11 Settings for Licensing
At each program start, the validity of the optiClient 130 license is checked at the license server.
The settings for the relevant license server are defined here. The server may be installed on
either the local optiClient 130 PC or on a central PC in the network. Select HiPath Provider -
Licensing.
Display
> Under Server, enter the IP address of the PC on which the license server for optiClient 130
is installed. For a local installation of the license server (as in the illustrated example), enter
the local IP address or the address of the local host. If the license server is installed on the
network, enter its IP address on the network.
> Under Port, enter the default port number for accessing the license server. It is 61740.
> Enter the maximum time (in milliseconds) for the attempt to set up a connection to the
license server in the Timeout field. Also define the number of Attempts.
>
After you have edited the QoS settings, you may be prompted to restart the optiClient
130. The restart is needed for the changed settings to take effect.