Operating instructions

optiClient5d_TelefonieHp4.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
10-11
Nur für den internen Gebrauch
Making Calls with the HiPath 3000/4000/5000
Settings for the HiPath Provider on HiPath 3000/4000/5000
> To operate Netmeeting at the same time as optiClient 130, e.g., to share documents from
another PC without an audio connection, activate the option Use port number under
H.225 signalling and enter the port number. Netmeeting uses port 1720 by default. ou
should therefore enter another port number, e.g., 11720, for optiClient 130.
10.1.9 Virtual Private Network (VPN) Settings
Under Provider modules - HiPath Provider - Virtual Private Network, specify optiClient 130
performance in a VPN (Virtual Private Network) environment.
optiClient 130 signals its IP address to its partner at certain times in a connection (for example,
for the target address of the audio packets). An optiClient 130 that is operated in a Virtual Pri-
vate Network (VPN) is assigned a new external IP address. It can no longer be contacted at its
old IP address. No voice packets could be exchanged if optiClient 130 continued to signal its
old IP address to its connection partner. optiClient 130 must therefore know its IP address as-
signed by the VPN.
> The following settings can be made in the list field:
– no
VPN is not used.
– Automatic
VPN is used, the client determines the IP address itself.
– Manual
VPN is used with a special IP address that you must specify in the entry field.
10.1.10 Quality of Service (QoS) Settings
If you want to make changes to the settings for QoS (Quality of Service), select Provider mo-
dules - HiPath Provider - Quality of Service.
Display
ur