Operating instructions

Making Calls with the HiPath 3000/4000/5000 Nur für den internen Gebrauch
A31003-G2550-A100-6-76A9, 04/2005
10-4 optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
optiClient5d_TelefonieHp4.fm
Settings for the HiPath Provider on HiPath 3000/4000/5000
● whether Electronic Key Labeling (EKL) is available for the key module columns in the
extended keypad.
● how many programmable function keys are available in the key module columns of the
extended keypad in optiClient 130.
> The following applies to the Maximum number of key modules:
– Minimum value 0:
the extended keypad is empty (no columns).
– Maximum value: 4 columns (or the maximum number of key modules per user confi-
gured on the connected communication system).
Key assignments
The following applies to the automatic function key programming / key assignments in optiClient
130:
● On starting up the optiClient 130, the function keys in the optiClient 130 phone (and to
some extent also in the extended keypad) are predefined with communication system-spe-
cific standard functions.
● For devices without EKL, optiClient 130 labels these keys with communication system-spe-
cific standard texts.
Changing the programming key function can be accomplished via the Service menu
prompts, and changing the labeling as well as the assignments of call numbers to keys can
be performed directly in optiClient 130 (see also Labeling/Programming Function Keys).
● For devices with EKL, all keys programmed with a function are always labeled with the "sui-
table" text by the connected communication system. Changing the function and thus the
labeling (key caption) is only possible via the Service Menu prompts. The assignment of a
key with a call number and the entry of the associated label are likewise also performed
exclusively via the Service menu.
More details on the service menu prompts on your communication system can be obtained
from the Administrator of the communication system.
Key module type: EKL Num. of Keys
as of column
2
● optiPoint 410 key module No 16
● optiPoint 420 key module Yes 13
>
On the communication system, there can still be a maximum number of concur-
rently present / opened key modules configured for all users. If this value is or
would be reached on opening the extended keypad, fewer key modules (co-
lumns) may be displayed there.