Operating instructions

optiClient5d_TelefonieHp4.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
10-1
Nur für den internen Gebrauch Making Calls with the HiPath 3000/4000/5000
Settings for the HiPath Provider on HiPath 3000/4000/5000
10 Making Calls with the HiPath 3000/4000/5000
This section provides information on the following topics:
● Settings for the HiPath Provider on HiPath 3000/4000/5000
● Settings for the CTI Provider on HiPath 3000/4000/5000
● Telephony functionsHiPath 4000
● HiPath 3000/5000 Telephony functions
10.1 Settings for the HiPath Provider on HiPath 3000/4000/5000
To configure your user settings for the HiPath 3000/4000/5000 communication systems, select
the Provider modules tab in the Settings dialog. The settings for HiPath 3000/4000/5000 can
be found under the entry HiPath Provider.
You can configure the following settings for the HiPath 3000/4000/5000 communication system:
● Device Settings
● Settings for the Main Connection
● Settings for Main Network Access
● Settings for the Fallback connection
● Settings for Fallback Network Access
● Settings for Failover
● Settings for Bandwidth Reduction
● Port Restriction Settings
● Virtual Private Network (VPN) Settings
● Quality of Service (QoS) Settings
● Settings for Licensing
● Operation Settings
>
The configuration of operation settings such as the ring tone (pitch) for the HiPath
provider can only be accessed on activating the dialog during live operation; the con-
figuration of all other settings for the HiPath Provider is only available if accessed via
the Login dialog.