Specification Sheet

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 17
Feature
Description
CISCOSB-dnscl-MIB
CISCOSB-embweb-MIB
CISCOSB-fft-MIB
CISCOSB-file-MIB
CISCOSB-greeneth-MIB
CISCOSB-greeneth-MIB
CISCOSB-interfaces-MIB
CISCOSB-interfaces_recovery-MIB
CISCOSB-vlanVoice-MIB
CISCOSB-EVENTS-MIB
CISCOSB-sysmng-MIB
CISCOSB-sct-MIB
CISCO-TC-MIB
CISCO-VTP-MIB
CISCO-CDP-MIB
Remote monitoring (RMON)
Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for
enhanced traffic management, monitoring, and analysis
IPv4 and IPv6 dual stack
Coexistence of both protocol stacks to ease migration
Firmware upgrade
Web browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over SSH
Dual images for resilient firmware upgrades
Port mirroring
Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 4
source ports can be mirrored to one destination port
VLAN mirroring
Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 4
source VLANs can be mirrored to one destination port
Dynamic Host Configuration
Protocol (DHCP) (options 12, 66,
67, 129, and 150)
DHCP options facilitate tighter control from a central point (DHCP server), to obtain IP address,
autoconfiguration (with configuration file download), DHCP Relay, and host name
Secure Copy (SCP)
Securely transfers files to and from the switch
Autoconfiguration with SCP file
download
Enables mass deployment with protection of sensitive data
Text-editable configs
Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass
deployment
Smartports
Simplified configuration of QoS and security capabilities
Auto Smartports
Automatically applies the intelligence delivered through the Smartports roles to the port based on the devices
discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero-touch deployments
Textview Command-Line
Interface (CLI)
Scriptable CLI. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are
supported for the CLI
Cloud services
Support for Cisco FindIT Network Manager and Cisco Active Advisor
Embedded FindIT Network
Probe
Support for embedded FindIT Network Probe running on the switch. Eliminates the need to set up a separate
hardware or virtual machine for the FindIT Network Probe on site
Cisco Network Plug and Play
(PnP) agent
The Cisco Network Plug and Play solution provides a simple, secure, unified, and integrated offering to ease
new branch or campus device rollouts or for provisioning updates to an existing network. The solution
provides a unified approach to provision Cisco routers, switches, and wireless devices with a near-zero-touch
deployment experience
Localization
Localization of GUI and documentation into multiple languages
Login banner
Configurable multiple banners for web as well as CLI
Other management
Traceroute; single IP management; HTTP/HTTPS; RADIUS; port mirroring; TFTP upgrade; DHCP client;
Simple Network Time Protocol (SNTP); cable diagnostics; Ping; syslog; Telnet client (SSH secure support);
automatic time settings from Management Station
Green (power efficiency)
Energy detect
Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss
of any packets when the switch detects the link is up
Cable length detection
Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables
EEE compliant (802.3az)
Supports IEEE 802.3az on all copper Gigabit Ethernet ports
Disable port LEDs
LEDs can be manually turned off to save on energy
Time-based port operation
Link up or down based on user-defined schedule (when the port is administratively up)
Time-based PoE
PoE power can be on or off based on user-defined schedule to save energy
General
Jumbo frames
Frame sizes up to 9K bytes. The default MTU is 2K bytes
MAC table
8K addresses