User Manual

1-4
Cisco SFS 3504 Multifabric Server Switch Hardware Installation Guide
OL-14325-01
Chapter 1 Cisco SFS 3504 Server Switch Overview
Cisco SFS 3504 Server Switch Chassis
Cisco SFS 3504 Server Switch Chassis
Figure 1-2 displays the data connection end of the Cisco SFS 3504 Server Switch and numbers the slots
on the chassis. FRUs with interfaces populate the data connection end of the chassis. Figure 1-2 is an
example of a typical Cisco SFS 3504 Server Switch configured with one Fibre Channel gateway module,
one Ethernet gateway module, and two filler panels in each of slots 1-4.
Note Slots 1-4 can be populated to contain any combination of Fibre Channel gateways, Ethernet gateways,
and filler panels. Slot 5 contains an IB switch card.
Figure 1-2 Cisco SFS 3504 Server Switch in a Typical Configuration - Data Connection End
The power-fan modules populate the chassis as shown in Figure 1-3. They are FRUs. For details about
installing and removing FRUs, see Chapter 4, “Installing and Removing Field-Replaceable Units.”
250152
Cisco SFS3504 Multifabric Switch
!
OK
1
2
3
4
5
6
7
8
9
10
11
12
TX/RX
Link
D
1
4
2
5
3
SFS350
0
Series F
C
Gate
w
ay
!
O
K
1
2
3
4
F
ault
L
in
k
SFS3
500 Ser
ies
Eth
ernet Gateway
!
O
K
1
2
3
4
5
6
TX/R
X
Link
1
0
0
/1
0
0
0
B
a
s
e
T
1 Slot 1—Cisco IB 4-Port Fibre
Channel gateway module
3 - 4 Slots 3 and 4—Blanking panels for I/O
slots
2 Slot 2—Cisco IB 6-Port Ethernet
gateway module
5 Slot 5—IB switch card