Datasheet

© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 9
Note: Parameters are specified over temperature and at end of life unless otherwise noted. When shorter
distances of single-mode fiber are used (<40km), an inline optical attenuator must be used to avoid overloading
and damaging the receiver.
Table 4 describes the bail latch color code for each type of optical SFP+ module.
Table 4. SFP+ Optical Modules Color Code
Product Bail Latch Color
Cisco SFP-10G-SR Beige
Cisco SFP-10G-SR-X Beige
Cisco SFP-10G-LRM Orange
Cisco FET-10G Brown
Cisco SFP-10G-LR Blue
Cisco SFP-10G-LR-X Blue
Cisco SFP-10G-ER Red
Cisco SFP-10G-ZR Green
Cisco SFP-H10GB-CU1M Beige
Cisco SFP-H10GB-CU1-5M Black
Cisco SFP-H10GB-CU2M Brown
Cisco SFP-H10GB-CU2-5M Yellow
Cisco SFP-H10GB-CU3M Orange
Cisco SFP-H10GB-CU5M Gray
Cisco SFP-H10GB-ACU7M Blue
Cisco SFP-H10GB-ACU10M Red
Cisco SFP-10G-AOC1M Beige
Cisco SFP-10G-AOC2M Brown
Cisco SFP-10G-AOC3M Orange
Cisco SFP-10G-AOC5M Gray
Cisco SFP-10G-AOC7M Blue
Cisco SFP-10G-AOC10M Red
Dimensions
Dimensions (H x W x D): 8.5 x 13.4 x 56.5mm. Cisco SFP+ connectors typically weigh 75 grams or less.
Environmental Conditions and Power Requirements
Operating temperature range:
●
Commercial temperature range (COM): 0 to 70°C (32 t o 158°F)
●
Extended temperature range (EXT): -5 to 85°C (23 to 185°F)
●
Storage temperature range: -40 to 85°C (-40 to 185° F)
Table 5 provides the maximum power consumption and operating temperature range ratings per Cisco SFP+
module.