Datasheet

25
Cisco SFP and SFP+ Transceiver Module Installation Notes
78-15160-07
Installing SFP and SFP+ Transceiver Modules
Note Different Cisco devices have different SFP module socket configurations. Your Cisco device
could have either a latch-up or a latch-down orientation. Ensure that you are installing the SFP
transceiver module in the correct orientation for your Cisco device. For more details, see the
hardware installation instructions that came with your Cisco device.
Step 6 Holding it as shown in Figure 8, insert the SFP into the socket until you feel the connector latch into
place.
Figure 8 Inserting an SFP Transceiver Module into a Module Socket
94126