System information

Configuring IP Information
Management and IP Interfaces
Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 223
16
STEP 1 Click Administration > Management Interface > (Layer 2) > IPv6 Routes.
The
IPv6 Routes page opens.
This page displays the following fields:
• IPv6 Address—The IPv6 subnet address.
• Prefix Length—IP route prefix length for the destination IPv6 subnet
address. It is preceded by a forward slash.
• Interface—Interface used to forward the packet.
• Next Hop—Address where the packet is forwarded. Typically, this is the
address of a neighboring router. This must be a link local address.
• Metric—Value used for comparing this route to other routes with the same
destination in the IPv6 router table. All default routes have the same value.
• Life Time—Time period during which the packet can be sent, and resent,
before being deleted.
• Route Type—How the destination is attached, and the method used to
obtain the entry. The following values are:
-
Local —A manually configured switch IPv6 address.
-
Dynamic —The destination is indirectly attached IPv6 subnet address.
The entry was obtained dynamically via the ICMP protocol.
STEP 2 Click Apply. The IPv6 route is added, and Running Configuration file is updated.