System information

VLAN Management
Voice VLAN
Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 181
12
To configure Telephony OUI on an interface:
STEP 1 Click VLAN Management > Voice VLAN > Telephony OUI Interface. The
Telephony OUI Interface page opens.
The
Te l e p h o n y O U I I n t e r f a c e page displays voice VLAN OUI parameters for all
interfaces.
STEP 2 To configure an interface to be a candidate port of the telephony OUI-based voice
VLAN, click Edit. The
Edit Interface Settings page opens.
STEP 3 Enter the values for the following fields:
• Interface—Select an interface.
• Telephony OUI VLAN Membership—If enabled, the interface is a candidate
port of the telephony OUI based voice VLAN. When packets that match one
of the configured telephony OUI are received, the port is added to the voice
VLAN.
• Voice VLAN QoS Mode—Select one of the following options:
- All—QoS attributes are applied only on all packets that are classified to
the Voice VLAN.
- Telephony Source MAC Address—QoS attributes are applied only on
packets from IP phones.
STEP 4 Click Apply. The OUI is added.