Specifications

2-695
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
telnet
telnet
Starts a Telnet session.
telnet address [port-number]
Syntax Description
Command Default The default port number is 23.
Command Modes Privileged EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: admin
Examples The following example shows how to start a Telnet session:
SCE8000>enable 10
Password:<cisco>
SCE8000#telnet 10.1.5.120
connecting to 10.1.5.120:23...
Related Commands
address Telnet access address.
port-number Optional port number.
Release Modification
2.5.7 This command was introduced.
Command Description
show telnet sessions Displays any active Telnet sessions.
service telnetd Enables the Telnet daemon.