Specifications

2-491
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
show interface linecard subscriber TP-IP-range
show interface linecard subscriber TP-IP-range
To view the details of the IPv4 and IPv6 traffic processor IP range configuration, use the show interface
linecard TP-IP-range command in privileged EXEC mode.
show interface LineCard slot subscriber {TP-IP-range [name range-name | all]}
Syntax Description
Command Default None.
Command Modes Privileged EXEC (#)
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: admin
Examples The following example shows how to display the subscriber details in a TP-IP range:
SCE8000> enable 5
Password: <cisco>
SCE8000> show interface LineCard 0 subscriber TP-IP-range name test
TP IP range test - IPv6 Range: 1080:a2b1::/48, Target TP: 3.
Number of Subscribers with mappings in the range: 0.
The following example shows how to display the subscriber details in all TP-IP ranges:
SCE8000> enable 5
Password: <cisco>
SCE8000> show interface LineCard 0 subscriber TP-IP-range all
Number of TP IP ranges currently configured: 4
TP IP range p2
IP Range: 0x98144248, Mask: 0x98144258, Target TP: 8.
Number of Subscribers with mappings in the range: 0.
Total number of Mappings found in the range: 0.
TP IP range p3
IP Range: 0x98144248, Mask: 0x98144258, Target TP: 7.
Number of Subscribers with mappings in the range: 0.
Total number of Mappings found in the range: 0.
slot The slot number of the Linecard. Enter 0.
TP-IP-range Traffic Processor IP range.
range-name Name of the IP range for which to view the subscriber mapping details.
Release Modification
3.8.0 This command was introduced.