Specifications

2-299
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
os-fingerprinting sampling
os-fingerprinting sampling
Configures the sampling window and the sampling interval for OS fingerprinting.
To reset the OS fingerprinting sampling window and interval to their default values, use the no form of
this command.
os-fingerprinting sampling
no os-fingerprinting sampling
Syntax Description
Command Default Window = 10 seconds
Interval = 10 minutes
Command Modes Interface Linecard Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines You must first enable OS fingerprinting (see os-fingerprinting).
Authorization: admin
Examples The following example shows how to sample OS fingerprinting for 50 seconds (window) every 60
minutes (interval).
SCE8000>enable 10
Password:<cisco>
SCE8000#configure
SCE8000#config)# interface linecard 0
SCE8000(config if)# os-fingerprinting
OsFingerPrint enable success
Related Commands
window How long flows from a subscriber are fingerprinted, in seconds (10-300)
interval Interval between fingerprinting periods, in minutes (10-1440)
Release Modification
3.7.x This command was introduced.
Command Description
os-fingerprinting Enables OS fingerprinting and loads the default.fp signature
file.
show os-fingerprinting config Displays the current OS fingerprinting configuration.