Specifications

1-8
Cisco SCE 8000 CLI Command Reference
Chapter 1 Command-Line Interface
Authorization and Command Mode Levels (Hierarchy)
• Global Configuration command mode
From this command mode, the following Interface Command Modes can be accessed:
– MNG Interface Configuration (management interface)
– Linecard Interface Configuration
– TenGigabitEthernet Interface Configuration (Cisco SCE 8000 10GBE traffic interfaces)
– GigabitEthernet Interface Configuration (Cisco SCE 8000 GBE traffic interfaces)
– Interface Range Configuration (range of traffic interfaces)
– Line Configuration
Table 1-5 summarizes how to navigate the CLI command hierarchy.
Table 1-5 CLI Command Navigation Hierarchy
Authorization Level or
Command Mode Use This Command to Access
Use This Command to
Exit
User Exec Not applicable logout or exit (Exits the
current CLI session)
Viewer enable 5 disable
Privileged Exec enable 10 or enable 15 (accesses root level) disable
Global configuration configure exit (Exits to Privileged
Exec)
end (Exits to User
Exec)
MNG interface
configuration
(management)
interface mng (0/1 | 0/2)
Or
interface gigabitethernet (1/1 | 1/2)
exit (Exits to Global
Configuration)
end (Exits to User
Exec)
Linecard interface
configuration
interface linecard 0 exit (Exits to Global
Configuration)
end (Exits to User
Exec)
TenGigabitEthernet
interface configuration
(Cisco SCE 8000 10GBE
traffic)
interface tengigabitethernet 3/<bay-number
(0-3)>/0
Or
interface range tengigabitethernet
3/<bay-range (any range between 0 and 3)>/0
exit (Exits to Global
Configuration)
end (Exits to User
Exec)