Specifications

2-148
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
end
end
Exits from Global Configuration mode or an interface configuration mode to the User EXEC
authorization level.
end
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Interface Linecard Configuration
Interface GigabitEthernet Configuration
Interface Range GigabitEthernet Configuration
Interface TenGigabitEthernet Configuration
Interface Range TenGigabitEthernet Configuration
Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Use this command to exit to the User EXEC authorization level in one command, rather than having to
execute the exit command twice. The system prompt changes to reflect the lower-level mode.
Authorization: admin
Examples The following example shows how to use this command:
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface linecard 0
SCE8000(config if)#end
SCE8000#
Release Modification
3.5.5 This command was introduced.