Specifications

2-51
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
clear interface linecard TpReportCounters
clear interface linecard TpReportCounters
To clear the following reports that are displayed, use the clear interface linecard TpReportCounters
command in the user EXEC mode:
• Total Number of Reports generated
• Number of Reports successfully sent to the Control Processor(CP)
• Number of Reports dropped at the corresponding Traffic Processor(TP)
clear interface lineCard slot-number TpReportCounters
Syntax Description
Command Default None.
Command Modes User EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines The authorization used is admin.
Examples The following is sample output from the clear interface linecard TpReportCounters command:
SCE>enable 15
Password:<cisco>
SCE>clear interface linecard 0 TpReportCounters
SCE>
Related Commands
slot-number Number of the identified slot. Enter a value of 0.
Release Modification
3.7.x This command was introduced.
Command Description
show interface lineCard slot-number
TpReportCounters
Displays the total number of RDR reports generated, reports
successfully sent to the CP and reports dropped at the
corresponding TP.