Specifications

2-36
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
auto-negotiate
auto-negotiate
Configures the GigabitEthernet interface auto-negotiation mode. Use this command to either enable or
disable auto-negotiation. When set to no auto-negotiate, auto-negotiation is always disabled, regardless
of the connection mode.
auto-negotiate
no auto-negotiate
default auto-negotiate
Syntax Description This command has no arguments or keywords.
Command Default By default, auto-negotiation is:
• On for inline connection mode
• Off for receive-only connection mode
Command Modes GigabitEthernet Interface Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Note that auto-negotiation does not work when the SCE platform is connected via an optical splitter
(receive-only connection mode).
Authorization: admin
Examples The following example configures GigabitEthernet line interface #1 (0/1) to perform no
auto-negotiation.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface GigabitEthernet 0/1
SCE(config if)#no auto-negotiate 
SCE(config if)#
Related Commands
Release Modification
2.5.7 This command was introduced.
Command Description
show interface
GigabitEthernet
Displays the details of a GigabitEthernet Interface.