Specifications

ManualsBrandsCisco ManualsComputer equipmentSCE 2000 4xGBE

Table Of Contents

Cisco SCE 2000 and SCE 1000 CLI Command Reference
Contents
- About this Guide
- Introduction
- Audience
- Document Revision History
  - Table 1 Document Revision History
- Organization
  - Table 2 Document Organization
- Related Publications
- Conventions
  - Table 3 Conventions
- Obtaining Documentation and Submitting a Service Request
  - 1
    - Command-Line Interface
- Introduction
- Authorization and Command Levels (Hierarchy)
- CLI Help Features
  - Partial Help
    - Example:
  - Argument Help
- Navigational and Shortcut Features
- Managing Command Output
- Creating a CLI Script
- Introduction
  - Syntax and Conventions
?
aaa accounting commands
aaa authentication attempts
aaa authentication enable default
aaa authentication login default
accelerate-packet-drops
access-class
- EXAMPLE 1
- EXAMPLE 2
access-list
- Table 2-1 Valid Permission Values (continued)
- EXAMPLE 1
- EXAMPLE 2
active-port
application slot replace force completion
asymmetric-L2-support
attack-detector default
- EXAMPLE 1
- EXAMPLE 2
attack-detector
attack-detector
- EXAMPLE 1
- EXAMPLE 2
- EXAMPLE 3
attack-detector TCP-port-list|UDP-port-list
attack-filter
- EXAMPLE 1
- EXAMPLE 2
- EXAMPLE 3
attack-filter dont-filter | force-filter
- EXAMPLE 1
- EXAMPLE 2:
- EXAMPLE 3:
- EXAMPLE 4:
attack-filter subscriber-notification ports
auto-fail-over
auto-negotiate
bandwidth
blink
boot system
calendar set
cd
clear arp-cache
clear interface linecard counters
clear interface linecard flow-filter
clear interface linecard mac-resolver arp-cache
clear interface linecard mpls vpn
clear interface linecard subscriber
clear interface linecard subscriber db counters
clear interface linecard TpReportCounters
clear interface linecard traffic-counter
clear interface linecard vas-traffic-forwarding vas counters health-check
clear interface linecard vpn
clear interface linecard vpn name upstream-mpls all
clear interface range
clear logger
- EXAMPLE 1:
- EXAMPLE 2:
- EXAMPLE 3:
clear management-agent notifications counters
clear rdr-formatter
clear scmp name counters
clock read-calendar
clock set
clock summertime
- EXAMPLE 1
- EXAMPLE 2
- EXAMPLE 3
clock timezone
clock update-calendar
configure
connection-mode (SCE 1000 platform)
connection-mode (SCE 2000 platform)
copy
copy ftp://
copy-passive
copy running-config-application startup-config-application
copy running-config-party-db startup-config-party-db
copy running-config startup-config
copy source-file ftp://
copy source-file startup-config
copy startup-config destination-file
copy startup-config-party-db backupfile
cpa-client destination
cpa-client retries
default subscriber template all
delete
- EXAMPLE 1:
- EXAMPLE 2:
dir
disable
- Figure 2-1 Disable Command
do
duplex
enable
- Figure 2-2 Enable Command
enable password
end
erase startup-config-all
exit
failure-recovery operation-mode
flow-capture
- Example 1
- Example 2
- Example 3
flow-capture controllers
force failure-condition (SCE 2000 only)
help
history
- EXAMPLE 1
- EXAMPLE 2
history size
hostname
interface gigabitethernet
interface linecard
interface mng
interface range gigabitethernet
ip access-class
ip address
ip advertising
- EXAMPLE 1:
- EXAMPLE 2:
ip default-gateway
ip domain-lookup
- EXAMPLE 1:
- EXAMPLE 2:
ip domain-name
- EXAMPLE 1:
- EXAMPLE 2:
ip filter fragment
ip filter monitor
ip ftp password
ip ftp username
ip host
ip name-server
ip radius-client retry limit
ip route
- EXAMPLE 1:
- EXAMPLE 2:
ip rpc-adapter
- EXAMPLE 1:
- EXAMPLE 2:
ip rpc-adapter port
- EXAMPLE 1:
- EXAMPLE 2:
ip rpc-adaptor security-level
ip ssh
- EXAMPLE 1:
- EXAMPLE 2:
- EXAMPLE 3:
ip ssh access-class
- EXAMPLE 1:
- EXAMPLE 2:
ip ssh key
- EXAMPLE 1:
- EXAMPLE 2:
ip-tunnel IPinIP DSCP-marking-skip
ip-tunnel IPinIP skip
ip-tunnel l2tp skip
l2tp identify-by
line vty
link failure-reflection
link mode
- EXAMPLE 1:
- EXAMPLE 2:
- EXAMPLE 3:
link port-enhanced-recovery
logger add-user-message
logger device
logger device user-file-log max-file-size
logger get support-file
logger get user-log file-name
logging facility
- Table 2-2 logging facility facility-type Argument
logging host
logging message-counter
logging on
logging rate-limit
logging trap
- Table 2-3 Syslog and SCOS Severity Levels
logout
mac-resolver arp
management-agent sce-api ignore-cascade-violation
management-agent sce-api logging
management-agent sce-api timeout
management-agent system
mkdir
more
more running-config-all
more running-config-application
more running-config-party-db
more startup-config-all
more startup-config-application
more startup-config-party-db
more user-log
mpls
- CHANGING VPN MODES
- EXAMPLE 1
- EXAMPLE 2
mpls vpn pe-id
- EXAMPLE 1
- EXAMPLE 2
no mpls vpn pe-database
no subscriber
no subscriber mappings included-in
party mapping ip-address name
party mapping ip-range
party name
party template index
periodic-records aggregate-by-cpu
ping
pqi install file
pqi rollback file
pqi uninstall file
pqi upgrade file
pwd
queue
rdr-formatter category number buffer-size
rdr-formatter category number name
rdr-formatter destination
- PRIORITIES
- EXAMPLE 1:
- EXAMPLE 2:
rdr-formatter destination protocol NetflowV9 template data timeout
rdr-formatter forwarding-mode
- Table 2-4 Valid Mode Settings
rdr-formatter history-size
rdr-formatter protocol
rdr-formatter protocol NetflowV9 dscp
rdr-formatter rdr-mapping
- EXAMPLE 1
- EXAMPLE 2
reload
reload shutdown
rename
rmdir
salt
sce-url-database add-entry
- Table 2-5 Examples for Defining URLs
sce-url-database import
- Guidelines for Managing the Protected URL Database
- Protected URL Database Import File
- Protected URL Database Import File Format
- Results
sce-url-database protection
- User Authorization Guidelines:
sce-url-database remove-all
scmp
scmp keepalive-interval
scmp loss-of-sync-timeout
scmp name
scmp reconnect-interval
scmp subscriber force-single-sce
scmp subscriber id append-to-guid
scmp subscriber send-session-start
script capture
script print
script run
script stop
service-bandwidth-prioritization-mode
service password-encryption
service rdr-formatter
- EXAMPLE 1:
- EXAMPLE 2:
service telnetd
- EXAMPLE 1:
- EXAMPLE 2:
service timestamps
setup
show access-lists
show applications slot tunable
show blink
show calendar
show clock
show failure-recovery operation-mode
show hostname
show hosts
show interface gigabitethernet
show interface linecard
show interface linecard accelerate-packet-drops
show interface linecard application
show interface linecard asymmetric-L2-support
show interface linecard asymmetric-routing-topology
show interface linecard attack-detector
- EXAMPLE 1:
- EXAMPLE 2:
show interface linecard attack-filter
- EXAMPLE 1:
- EXAMPLE 2:
- EXAMPLE 3:
show interface linecard cascade connection-status
- Example 1
- Example 2
show interface linecard cascade peer-sce-information
- Example 1
- Example 2
show interface linecard cascade redundancy-status
show interface linecard connection-mode
- Example 1
- Example 2
show interface linecard counters
show interface linecard cpa-client
show interface linecard duplicate-packets-mode
show interface linecard flow-capture
show interface linecard flow-open-mode
show interface linecard ip-tunnel
show interface linecard ip-tunnel IPinIP
show interface linecard l2tp
show interface linecard link mode
show interface linecard link-to-port-mappings
show interface linecard mac-mapping
show interface linecard mac-resolver arp
show interface linecard mpls
show interface linecard mpls vpn
show interface linecard periodic-records aggregation
- Table 2-6 Field descriptions for the show interface linecard periodic-records aggregation command
show interface linecard physically-connected-links (SCE 2000 only)
show interface linecard sce-url-database
show interface linecard sce-url-database protection
show interface linecard service-bandwidth-prioritization-mode
show interface linecard shutdown
show interface linecard silent
show interface linecard subscriber
- EXAMPLE 1
- EXAMPLE 2
show interface linecard subscriber aging
show interface linecard subscriber anonymous
show interface linecard subscriber anonymous-group
show interface linecard subscriber db counters
- Counter Definitions
- Current values:
- Peak values:
- Event counters:
- EXAMPLE 1
- EXAMPLE 2
show interface linecard subscriber mapping
- EXAMPLE 1
- EXAMPLE 2
- EXAMPLE 3
show interface linecard subscriber name
- Example 1
- Example 2
show interface linecard subscriber name breach-state
- Example 1
- Example 2
show interface linecard subscriber name bucket-state
show interface linecard subscriber name bucket-state id
show interface linecard subscriber properties
show interface linecard subscriber sm-connection-failure
- EXAMPLE 1
- EXAMPLE 2
show interface linecard subscriber templates
show interface linecard subscriber tp-mappings statistics
show interface linecard subscriber tp-ip-range
show interface linecard subscriber mapping included-in tp-ip-range
- EXAMPLE 1:
- EXAMPLE 2:
show interface linecard subscriber max-subscribers
show interface linecard tos-marking
show interface linecard TpReportCounters
show interface linecard traffic-counter
show interface linecard traffic-rule
show interface linecard vas-traffic-forwarding
- EXAMPLE 1
- EXAMPLE 2
- EXAMPLE 3
- EXAMPLE 4
show interface linecard virtual-links
- Example 1
- Example 2
show interface linecard vlan
show interface linecard vlan translation
show interface linecard vpn
- EXAMPLE 1
- EXAMPLE 2
- EXAMPLE 3
- EXAMPLE 4
- EXAMPLE 5
show interface linecard wap
show interface mng
show inventory
show ip access-class
show ip advertising
show ip default-gateway
show ip filter
show ip radius-client
show ip route
- EXAMPLE 1:
- EXAMPLE 2:
show ip rpc-adapter
show ip ssh
show line vty
show log
show logger device
- EXAMPLE 1
- EXAMPLE 2
show management-agent
show management-agent sce-api quota
show party name
show pqi file
show pqi last-installed
show rdr-formatter
show rdr-formatter connection-status
show rdr-formatter counters
show rdr-formatter destination
show rdr-formatter enabled
show rdr-formatter forwarding-mode
show rdr-formatter history-size
show rdr-formatter protocol NetflowV9 dscp
show rdr-formatter rdr-mapping
show rdr-formatter statistics
show running-config
show running-config-all
show running-config-application
show running-config-party-db
show scmp
show snmp
show snmp community
show snmp contact
show snmp enabled
show snmp host
show snmp location
show snmp mib
show snmp traps
show sntp
show startup-config
show startup-config-all
show startup-config-application
show startup-config-party-db
show system operation-status
show system-uptime
show tacacs
- EXAMPLE 1
- EXAMPLE 2
show telnet sessions
show telnet status
show timezone
show users
show version
show version all
show version software
silent
snmp-server
snmp-server community
snmp-server contact
snmp-server enable traps
snmp-server host
snmp-server interface
- EXAMPLE 1
- EXAMPLE 2
snmp-server location
sntp broadcast client
sntp server
sntp update-interval
speed
subscriber aging
subscriber anonymous-group export csv-file
subscriber anonymous-group import csv-file
subscriber anonymous-group name ip-range
- EXAMPLE 1
- EXAMPLE 2
- EXAMPLE 3
- EXAMPLE 4
subscriber capacity-options
subscriber downstream-split-flow-pull
subscriber export csv-file
subscriber import csv-file
subscriber ip-linger-stats
subscriber ip-linger-time
subscriber max-subscribers
subscriber name property
subscriber sm-connection-failure
- EXAMPLE 1
- EXAMPLE 2
subscriber template export csv-file
subscriber template import csv-file
subscriber tp-mappings
subscriber tp-ip-range name ip-range target-tp
subscriber tp-ip-range {import | export} csv-file
tacacs-server host
tacacs-server key
tacacs-server timeout
telnet
timeout
tracert
traffic-counter
- EXAMPLE 1:
- EXAMPLE 2:
traffic-rule
- IP specification:
- port specification:
- tunnel id specification:
- traffic-counter name:
- action:
- Example 1:
- Example 2:
- Example 3:
- Example 4
tunable value
unzip
username
- Example 1
- Example 2
- Example 3
username privilege
vas-traffic-forwarding
vas-traffic-forwarding traffic-link
vas-traffic-forwarding traffic-link auto-select
- Example 1
- Example 2
vas-traffic-forwarding vas health-check
- Example 1
- Example 2
- Example 3
- Example 3
vas-traffic-forwarding vas server-id health-check
- Example 1
- Example 2
- Example 3
- Example 4
vas-traffic-forwarding vas server-id vlan
vas-traffic-forwarding vas server-group
- Example 1
- Example 2
- Example 3
vas-traffic-forwarding vas server-group failure
- Example 1
- Example 2
vas-traffic-forwarding vas server-id
- Example 1
- Example 2
virtual-links index direction
- Direction
- Global Controller (GC) Templates
- Global Controllers -Relative Index
- PIR Values
- Example 1
- Example 2
- Example 3
vlan
- Symmetric and Asymmetric Environments
- Changing VPN Modes
vlan translation
wap

2-28

Cisco SCE 2000 and SCE 1000 CLI Command Reference

OL-26797-03

Chapter 2 CLI Command Reference

attack-detector TCP-port-list|UDP-port-list

Related Commands Command Description

attack-detector <number> Configures a specific attack detector for a particular attack type

(protocol/attack direction/side) with the assigned number.

attack-filter (LineCard

Interface Configuration)

Enables specific attack detection for a specified protocol and attack

direction.