Specifications

2-547
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
vas-traffic-forwarding vas health-check
• The same IP address should be configured for all the SCE platforms under the same EtherChannel.
Authorization: admin
Examples The following examples illustrate how to enable multiple GBE platform compatibility for the VAS health
check, and how to define the IP addresses.
Example 1
This example shows how to enable multiple GBE platform compatibility for the VAS health check.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface linecard 0
SCE(config if)#vas-traffic-forwarding health-check topology mgscp 
SCE(config if)#
Example 2
This example shows how to define the source and destination IP addresses.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface linecard 0
SCE(config if)#vas-traffic-forwarding health-check ip-address source 20.20.20.20/28
destination 10.10.10.10

SCE(config if)#
Example 3
This example shows how to remove the IP address configuration using the no keyword.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface linecard 0
SCE(config if)#no vas-traffic-forwarding health-check ip-address 
SCE(config if)#
Example 3
This example shows how to remove the IP address configuration using the default keyword.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface linecard 0
SCE(config if)#default vas-traffic-forwarding health-check ip-address 
SCE(config if)#
Related Commands Command Description
vas-traffic-forwarding Enables VAS traffic forwarding.
show interface
linecard
vas-traffic-forwarding
Displays information regarding VAS configuration and operational status
summary.
pseudo-ip