Specifications

2-22
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
attack-detector
attack-detector
Enables the specified attack detector and assigns an access control list (ACL) to it.
attack-detector number access-list access-list
Syntax Description
Command Default This command has no default settings.
Command Modes LineCard Interface Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Use the following commands to define the attack detector and the ACL:
• attack-detector
• access-list
Authorization: admin
Examples The following example enables attack detector number "2", and assigns ACL "8".
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface LineCard 0
SCE(config if)#attack-detector 2 access-list 8

SCE(config if)#
Related Commands
number The attack detector number.
access-list The number of the ACL containing the IP addresses selected by this
detector
Release Modification
2.5.7 This command was introduced.
Command Description
access-list Adds an entry to the bottom of the specified access list.
attack-detector <number> Configures a specific attack detector for a particular attack
type (protocol/attack direction/side) with the assigned
number.