Specifications

2-513
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
subscriber tp-mappings
subscriber tp-mappings
Reserves a specified number of subscriber rules for TIRs.
subscriber tp-mappings max-tp-ip-ranges max-tp-ip-ranges
default subscriber tp-mappings
Syntax Description
Command Default This command has no default settings.
Command Modes Linecard Interface Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines The maximum number of allowed reserved rules is 4096.
• By default 0 (zero) rules are reserved for TIRs.
• Updating this configuration is a major system event and can only be performed when no subscriber
mappings or TIRs are configured.
Use the default version of this command to restore default subscriber rule allocation.
Authorization: admin
Examples The following example reserves 500 subscriber rules for TIRs.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface linecard 0
SCE(config if)#subscriber tp-mappings max-tp-ip-ranges 500

SCE(config if)#
max-TP-IP-ranges Number of rules to allocate for TIRs
Release Modification
2.5.7 This command was introduced.