Specifications

2-510
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
subscriber sm-connection-failure
Examples The following examples illustrate how to use this command.
EXAMPLE 1
The following example configures forced failure of the SCE platform in case of failure of the SM.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface linecard 0
SCE (config if)#subscriber sm-connection-failure action force-failure

SCE (config if)#
EXAMPLE 2
The following example sets the timeout interval to two minutes (120 seconds).
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface linecard 0
SCE (config if)#subscriber sm-connection-failure timeout 120

SCE (config if)#
Related Commands Command Description
show interface
linecard subscriber
sm-connection-failure
Displays the current state of the SM-SCE platform connection, as well as
the configured action to take in case of failure of that connection.