Specifications

2-509
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
subscriber sm-connection-failure
subscriber sm-connection-failure
Configures the behavior of the system in case of communication failure between the SM and the SCE
platform.
subscriber sm-connection-failure action [force-failure|none|remove-mappings|shut]
subscriber sm-connection-failure timeout timeout
default subscriber sm-connection-failure
Syntax Description
Command Default Default action = none
Command Modes Linecard Interface Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines If SM functionality is not critical to the operation of the system: no action needs to be configured.
If SM functionality is critical to the operation of the system: configure forced failure of the SCE platform
in the event of any loss of connection with the SM.
Use the timeout parameter to configure the time interval after which a failure condition is detected and
the specified action will be taken by the system.
Authorization: admin
timeout The timeout interval in seconds.
force-failure Force failure of the SCE platform in the event of any loss of connection with
the SM
The SCE platform then acts according to the behavior configured for the
failure state.
none No action needs to be taken in the event of any loss of connection between
the SCE platform and the SM
remove-mappings Remove all current subscriber mappings n the event of any loss of
connection between the SCE platform and the SM
shut The SCE platform shuts down and quits providing service.
Release Modification
2.5.7 This command was introduced.