Specifications

2-503
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
subscriber ip-linger-stats
subscriber ip-linger-stats
To view the configured linger-time and flow details, use the subscriber ip-linger-stats command in
linecard interface configuration mode.
subscriber ip-linger-stats
Syntax Description
Command Default This command has no default settings.
Command Modes Linecard Interface Configuration.
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: admin
Examples The following example shows how to view the configured linger-time and flow details:
SCE(config)#interface linecard 0
SCE(config if)# subscriber ip-linger-stats
IP lingering option is enabled
Configured linger time is 240 seconds
Linger time flows:
====================
Traffic Processor 1 : 0
Traffic Processor 2 : 2
Traffic Processor 3 : 5
ip-linger-stats Shows the configured linger time and flow statistics.
Release Modification
3.7.x This command was introduced.