Specifications

2-497
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
subscriber capacity-options
subscriber capacity-options
Overrides the capacity option when loading the SCA BB application.
subscriber capacity-options (enable | disable)
Syntax Description This command has no arguments or keywords
Command Default By default, the capacity option is enabled.
Command Modes Linecard Interface Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines You must first define the maximum number of subscribers using the subscriber max-subscribers
command.
You must override the capacity option before installing the pqi file.
If you have disabled the capacity option and then the next time you load a new application you want to
use the capacity option, you must re-enable the capacity option before loading the application file.
Caution If you have applied a policy configuration (PQB file) to the SCE platform, you must retrieve it and save
it before loading an application file. Then reapply it after executing the command and loading the PQI
file. (PQB files are managed from the SCA BB console.)
Authorization: admin
Examples The following example illustrates how to use this command.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface linecard 0
SCE(config if)#subscriber max-subscribers 500K
SCE(config if)#subscriber capacity-options disable
SCE(config if)#pqi install file mov2008.pqi
Release Modification
3.5.0 This command was introduced.