Specifications

2-494
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
subscriber anonymous-group name ip-range
subscriber anonymous-group name ip-range
Assigns the anonymous group to the specified range of IP addresses and optional template or to an SCMP
device or to a Cisco SCE.
To delete the anonymous group or remove it from the specified SCMP destination, use the no form of
this command.
subscriber anonymous-group name group-name ip-range range [template template]
subscriber anonymous-group name group-name ip-range range {None | scmp name
[scmp-name]}
no subscriber anonymous-group {name group-name [scmp] | all}
Syntax Description
Command Default This command has no default settings.
Command History This table includes the following release-specific history entries:
Command Modes Linecard Interface Configuration
Usage Guidelines An anonymous subscriber group is a specified IP range, where each IP address in the given range is treated
as a separate subscriber. You can assign a subscriber template to the group so that all subscribers in the
group have properties as defined by that template.
This command defines the IP range of the specified anonymous group and optionally defines a subscriber
template to be assigned to all subscribers within that IP range.
Anonymous groups can have overlapping IP ranges. When the SCE platform detects traffic for an IP
address which is contained in more than one anonymous group, the group with the longest prefix is used
to create the anonymous subscriber for that IP address.
group-name Name of the anonymous group.
range IP range of the anonymous group.
template Group template for the anonymous group (optional).
scmp-name Name of the SCMP peer device (optional).
None Assigns the anonymous group to the SCE. The subscribers assigned to the
SCE remains anonymous always.
all Specifies all anonymous subscriber group definitions.
Release Modification
3.1.6 This command was introduced.
3.6.0 Option None was introduced.