Specifications

2-480
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
snmp-server contact
snmp-server contact
Sets the MIB-2 variable system contact. Use the no form of this command to remove the contact setting.
snmp-server contact contact
no snmp-server contact
Syntax Description
Command Default This command has no default settings.
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: admin
Examples The following example configures the system contact.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#snmp-server contact [e-mail]
SCE(config)#
Related Commands
contact A string that identifies the system contact.
Release Modification
2.5.7 This command was introduced.
Command Description
show snmp contact Displays the configured MIB-2 variable sysContact.