Specifications

Table Of Contents
2-478
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
snmp-server
snmp-server
Enables the SNMP agent. You can use any of the other SNMP-server commands to enable the SNMP
agent. Use the no form to disable the SNMP agent from responding to SNMP managers. All SNMP
settings are saved and are restored when the SNMP agent is re-enabled.
snmp-server enable
no snmp-server
Syntax Description This command has no arguments or keywords.
Command Default disabled
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines You must define at least one community string in order to allow SNMP access. For complete information
on community strings.
Authorization: admin
Examples The following example disables the SNMP server.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#no snmp-server
SCE(config)#
Related Commands
Release Modification
2.5.7 This command was introduced.
Command Description
snmp-server
community
Sets a community string.
show snmp Displays the SNMP configuration and counters.